VISHAL

VISHAL 366

Tractor Driven Combine Harvesters

VISHAL
VISHAL
VISHAL
VISHAL

Model: VISHAL 366

Category: Tractor Driven Combine

Type: Straw Walker

Cutter Bar: 12 Feet

No. of Straw Walkers: 6 (Six)

Tractor Required: 50 HP+

Harvesting: Multicrop

Steering: As Per Tractor

VISHAL TDC is tractor driven combine harvester that harvests grain crops in three separate operations comprising harvesting, reaping, threshing and winnowing into a single process. Among the crops harvested with this combine harvester are wheat, oats, rye, barley, soybean, sunflower, grame and pulses. The waste straw left behind on the field is the remaining dried stems and leaves of the crop with limited nutrients which is either chopped and spread on the field or baled for feed and bedding for livestock. VISHAL Combine Harvesters are one of the most economically important labour and time saving harvesting machines, significantly reducing the fraction of the population that must be engaged in agriculture.

Features and Highlights:

  • High Road Speed 
  • High Ground Clearance 
  • Very Low Cutting Height 
  • Power Coated Body Paint for Long Life 
  • Stainless Steel Elevators
  • Heavy Duty Double Reel
  • Wide Straw Walker
  • Thorough Threshing
  • Clear Separation
  • No Grain Breakage
  • High Grain Cleanness
  • Small Turning Radius
  • Easy to Maintain
  • Suitable for Wheat, Paddy, Soyabean, Sunflower & Mustard
  • Good maneuverability in the Wet and Soft Fields
MANUFACTURER MANKU Agro Tech Private Limited.
Address of Manufacturer Sehajpura Road, Samana - 147101, Distt. Patiala, Punjab. INDIA
MAKE VISHAL
Model 366 - TDC
Type Tractor Driven Combine Harvester
THRESHING DRUM FOR WHEAT FOR PADDY
Type Rasp Bar Peg Tooth
Width (mm) 1145 1145
Outside Dia (mm) 605 600
STRAW WALKER
No. of Straw Walker Five
Type Closed Rack Type. Serrated side edges with 6 steps on each Straw Walker.
Size of each Straw Walker
Length (mm) 3560
Width  (mm) 215
Area (M2) 0.785
Effective separating area of straw walker (M2) 0.682
Lift/throw (mm) 75/75
Oscillation per minute corresponding to 1750 RPM of Engine 153
GRAIN TANK
Location On top of Combine, Behind Tractor.
CONCAVE FOR WHEAT FOR PADDY
Overall  Width of Concave (mm) 1160 1160
Effective Width (mm) 1125 1120
Type of concave Open grate wire mesh Open flat bars with pegs in three rows.
No. of Bars 12 axial flat with4 M.S Rod of 12 mm dia &98 M.S wire of 4 mm dia are passing. 07 axial M.S flat interconnected with one another by small pieces of metallic rod in which only first three having pegs.
No. of Pegs per bars - 15 & 16 pegs each in alternate three row.
CLEANING SIEVES
TOP Sieve
No of sieve Two
Type Open lip frog mouth type
Overall size of sieve FRONT REAR
Length (mm) 1400 530
Width (mm) 1085 1085
Effective cleaning area (m2) 1.366 0.468
Area of extension (m2) NIL NIL
BOTTOM SIEVE
No of Sieve One
Type Open Lip Frog Mouth Type
Length (mm) 1410
Width (mm) 1085
Effective Cleaning Area (m2) 1.394
CUTTER BAR ASSEMBLY
Working width with shoes (mm) 3696
Effective cutter bar width (mm) 3660
No. & Spacing of knife guards 50 (25 Pairs)
No. & Type of knife blades 50, Serrated
Details of knife drive End of Cutter Bar is connected with a lever to the Pittman shaft and other end of pitman shaft is connected to eccentric cam arm which is connected to driving shaft.
Knife Safety Arrangements Knife Guard Provided
Knife stroke(mm) 80
Stroke per minute 874
Knife speed corresponding to 1750 rpm of engine (m/sec.) 1.165
REEL ASSEMBLY
Type Tyne Bar Pick Up
Number of Tyne bars Six
Size of Tyne bars (mm) Dia - 27.0 Length - 3550
Types of Tyne bars Hollow metallic pipe with holes for fitting spring Tynes.
Dia of Reel (mm) 890.0
Width of Reel (mm) 3600
Range of speed corresponding to 1750 RPM of Engine (RPM) Maximum: 47 Minimum: 32
Arrangements for speed variation Mechanical,Stepless V – Pulley with mechanical variator.
Number of tynes on each bar and their spacing 28 (14 pairs)
OVERALL DIMESIONS  
Length (mm) 7595
Width (mm) 4345
Height 3464

Due to our policy of continues R&D in Product Improvement and Development the Product Design, Color and/or Technical Specifications may change without any prior notice. Please confirm the Latest Product Specifications by mailing us at sales@mankuagro.com